鞠秀燕;鱼兰琼;谢周银;
1:一汽山东汽车改装厂
摘要：本文采用有限元软件ANSYS对LC300桥进行了建模、计算和分析。通过采用误差估计等技术处理手段,得到了计算精度较高的有限元模型,为进一步降低桥壳故障率,提供了理论参考。
关键词： 驱动桥;;疲劳寿命;;有限元分析
Abstract: In this paper,the finite element
software ANSYS is used to do modeling,calculation and analysis for the drive
axle.By using the technical mean of error estimation,a high precise finite
element model is achieved,which can provide a reference to reduce troubles in
the drive axle housing.
Keywords: Drive Axle;Fatigue Life;Finite
Element;Analysis
参考文献：
[1]J.Vogwell.Analysis of a vehicle wheel
shaft faiure.EngineeringFailure Analysis.1998,(5):4.
[2]龙靖宇.弹性力学基础及有限单元法.武汉钢铁学院出版社,1993:1~25.
[3]丁遂栋,孙利民.断裂力学.机械工程出版社,1997:1~12,47~69,108~163
[4]Makoto Akama.Bayesian analysis for the
results of fatigue testusing full-scale models to obtain the failure
probabilities of theShinkansen vehicle axle.Reliability Engineering and
systemSafety.2002,(1):75.
[5]东方人华.ANSYS 7.0入门及提高.清华大学出版社,2004:2~5
[6]龚培康.汽车拖拉机有限元法基础[M].北京机械工业出版社,1995:132~136
[7]刘斌.桥壳的有限元分析及结构优化.上海汽车.2004,(18):20~22
|
