彭玮;田杰安;雷舒蓉;闫伟;郭峰;王应梁;
1:山东大学能源与动力工程学院
2:中国人民解放军驻六一七厂军代室
摘要：本文针对一款设计中的工程机械冷却系统,建立了一维数值模型与三维CFD模型。通过一维/三维耦合计算,研究在散热器模块串联安置并留有间隙的情况下,部分空气绕过前排散热器流动对工程机械冷却系统换热性能造成的影响。将CFD计算结果的风速数据嵌入标准的一维数值模型,对一维仿真计算进行修正。修正后,前排低温油散热器尺寸需要增加约11.3%,经实验验证满足要求。一维/三维耦合仿真使冷却系统热管理仿真计算的精度得到提高,使一维仿真结果更加接近实际情况。
关键词： 冷却;;热管理;;一维/三维耦合仿真;;CFD
Abstract: Both 1- D numerical model and 3-
D CFD model for the construction machinery cooling system are built. Concerning
the fixing clearance of the radiators in series arrangement,1-D /3- D coupling
simulations are utilized to study the influence on heat exchange performance of
the cooling system of the construction machinery when the air is being diverted
sideways around the front radiator. Airflow velocity magnitudes of CFD
simulation are embedded in the standard 1- D numerical model to correct the 1-
D numerical simulation. After correction,the size of the front radiator needs
to increase 11. 3%. The simulation results are validated with experimental
tests. The 1- D /3- D coupling simulation can improve the accuracy of a thermal
management simulation of the cooling system,so the simulation results are
closer to the actual situation.
Keywords: Cooling;;Thermal Management;;1-D
/3-D Coupling Simulation;;CFD
基金项目: 国家十二五科技支撑计划(2011BAG04B02):工程机械用串联式混合动力系统开发;; 山东省科技发展计划(2011GGX1040):汽车散热器优化设计平台研发
参考文献：
[1]Ilhan Bayraktar,Computational simulation
methods for vehicle thermal management[J].Applied Thermal
Engineering,2012,36:325-329.
[2]梁小波,袁侠义,谷正气,等.运用一维/三维联合仿真的汽车热管理分析[J].汽车工程,2010.32(9):793-798.
[3]张宝亮,范秦寅,胡广洪,等.整车热管理的一维与三维耦合仿真[J].汽车工程,2011.33(6):493-496.
[4]袁聿震.基于一、三维耦合的车辆热管理系统仿真计算[D].济南:山东大学,2012.
|
