仲杰,傅松,闫伟,胡玉平,李国祥
山东大学能源与动力工程学院;
摘要：本文利用CFD软件Fluent对活塞的喷油强制冷却进行了三维数值计算,模拟了活塞处于不同位置时,冷却机油在内冷油腔和活塞顶内壁空腔内的流动与分布,得到了不同位置时冷却机油在内冷油腔内的体积分数和质量流量。模拟结果为活塞冷却油腔的优化设计提供了依据。
关键词： 数值模拟;喷油冷却;体积分数
Abstract：In this paper,three-dimensional numerical
calculations of forced oil-injection cooling was conducted us ing CFD software
Fluent,simulating the flow and distribution of the cooling oil in the cooling
gallery and the piston inside-wall cavity with different piston locations
besides the volume fraction and mass flow of the cooling oil in the cooling
gallery.The simulation provides more dependable theoretical evidences for the
optimization design of the Cooling Gallery of piston.
Keyword：Numerical Simulation;Oil-injection
Cooling;Volume Fraction
参考文献:
[1]冯耀南,张翼.振荡油腔位置对柴油机活塞温度场的影响[J].装备制造技术.2009(6):11-13.
[2]杨波.活塞的热分析及底喷冷却研究:[硕士学位论文].大连:大连理工大学动力机械及工程系,2008.
[3]Jinfeng Pan,Roberto
Nigro,EduardoMatsuo.3-D Model-ing of Heat Transfer in Diesel Engine Piston
Cooling Galler-ies[C].SAE Paper 200520121644,2005.
[4]Yong Yi,Madhusudhana Reddy,Mark
Jarret,et al.CFDModeling of the Multiphase Flow and Heat Transfer for Pis-ton
Gallery Cooling System[C].SAE Paper 200720124128.
[5]王仁信,胡玉平,李国祥.活塞喷油冷却流场数值模拟[J].现代制造技术与装备,2010,(5):1-3.
[6]吴义民,徐传民,徐涛.活塞内冷油腔及冷却喷嘴初步研究[J].内燃机与动力装置,2009(6):15-18.
|
