周裕干,赵士博,张国华,公茂秀
1:山东省内燃机研究所
2:山东活塞厂，3:山东活塞厂
4:山东省冶金科学研究院
摘要：本文综述新型复合材料在内燃机基础件上的开发与应用，复合材料零部件将成为新一代内燃机最重要的标志之一。
关键词： 复合材料;;内燃机基础件;;发展动态
参考文献：
l Y. B. Satdarl, K. Kemarasekaran. A FEM
ThermalAnalysis on a Novel Designed Air -- Gap InsulatedPiston. SAE Paper
932490
2 M. Vuaya Babu, R. Krishna Kumar等 Fracture Mechanics Approaches to Coating Strength Evaluation.1996
3 A. R. Bakor. Development of Pistons Materals. 1986AE Technical
Symposium Paper NO. 5
4 Fibar - Reinforced Aluminium Alloy for
Diesel Engine Parts. JACT News, 1987
5 Development of New Fiber - Reinforced
AluminiumAlloy for High Performance Diesel Engine Pistons.JSAN Review, 1988
6山东省汽车工程学会材料专业委员会成立大会暨第一届年会论文集,1998.12
7 E. Khoshravan, E. Khoshravan. Heat
Transfer Studiesin an Adiabatic Diesel Engine .The SixthInternationalPacific
Conference on Automotive Engineering. Paper912502
8 High Temperature Engine Component
Exploratory Design Development. U. S. Army Bryzik. Concept Analysis Corp, 1989
9 Diaa M. Hosny, Richard W.Young 等. A System Approach for the
Assessment of Cavitation CorrosionDamage of Cylinder Liners in Intemal
CombustionEngines, 1993
10 Getting the Most From Bonded Piston
Seals, 1993
11周裕干,赵士博等.复合材料活塞发展动态.第一届全国铸造复合材料学术会议论文集,1997.6
12周裕干,赵士博等、复合材料强化活塞的试验研究.第一届全国铸造复合材料学术会议论文集、1997.6
13 One -- Piece Bonded Piston Seal for
Higher PressureApplications. Product Engineering Manager ofAcadiaPolymers, 1996. 8
14 Peter Reipert, Siegfried Mielke, Gunder
Essig.Pistons of DI - Diesel Engines with Reduced HeatFlow. Kolbenschmidt AG,
1989
|
