迟绍宁;陈传忠;李树生
1:山东大学材料科学与工程学院
2:济南柴油机股份有限公司
摘要:本文通过对190柴油机模锻连杆上的裂纹检验分析,找到了造成该批连杆开裂的主要原因,是由于原材料中存在严重的成分偏析所致。同时指出了连杆在锻造和热处理过程中存在问题。通过这一失效事件,我们也指出了这种原材料缺陷目前在我国国家标准GB3077《合金钢结构钢》中还没有做出限制规定。希望有关单位,今后在制定原材料验收标准及生产操作时应引起重视。
关键词: 连杆;;裂纹;;失效;;原材料;;成分偏析
Abstract: The cracks on the forging
connecting rod of the 190 diesel engine were analyzed.The main reason that
causes the failure of the connecting rod is considered to be the composition
segregation of row materials.The problems existing in the forging and heat treatment
processes were pointed.At present,the demand about the defect of row materials
were not listed in the national standard GB3077 Alloyed Structural Steels.It is
expected that this problem should be considered strictly when acceptance
standard of row materials was set down or during operation.
Keywords: Connecting Rod;Crack,Failure;Row
Materials;Composition Segregation
参考文献:
[1]合金结构钢.GB/T3077
[2]钢铁金相图谱.上海科学技术文献出版社P796
[3]结构钢低倍组织缺陷评级图.GB/T1979
[4]钢铁材料及有色金属材料.崔等编
[5]机械零件失效分析.刘瑞堂编.哈尔滨工业大学出版社,2003.9
pan>
[2]A D Brailsford,E M Logothetis,M Yussouff
et al.Estimation ofthe Switch Point of an Exhaust Gas Oxygen Sensor in
GeneralExhaust Environments.SAE Paper,No.950531,1995.
[3]A.D.Brailsford,M.Yussouff,E.M.Logothetis.A
First-Principles Model of the Zirconia Oxygen Sensor.Sensors and
Ac-tuators,B44,1997:321-326.
[4]M Sami Fadali,G Cai,Y A Ghoneim.Air/Fuel
Ratio Control-ler Design Using the Describing Function Approach.Proceedingsof
the American Control Conference,Baltimore,Maryland,June1994.
[5]Alois Amstutz,Nicholas P Fekete,J David
Powell.Model-Based Air-Fuel Ratio Control in SI Engines with a Switch-Type EGO
Sensor.SAE Paper,No.940972,1994.
[6]Chen-Fang Chang,Nicholas P Fekete,Alois
Amstutz,J Dav-id Powell.Air-Fuel Ratio Control in Spark-Ignition EnginesUsing
Estimation Theory.IEEE Transactions on Control
SystemsTechnology,Vol.3,No.1,March 1995.
[7]J David Powell,N P Fekete,Chen-Fang
Chang.Observer-Based Air-Fuel Ratio Control.IEEE Control
System,October1998:72~83.
[8]J G.Buglass,T D B Morgan,J O
Graupner.Interactions Be-tween Exhaust Gas Composition and Oxygen Sensor
Performance.SAE paper,No.982646,1998.
[9]Jianzhong Zhu,Congxin Ren,Guoliang Chen
et al.A New Au-tomotive Air/Fuel Sensor Based on TiO2-Doped Nb2O5ThinFilm by
Ion-Beam-Enhanced Deposition.Sensors and Actua-tors,B32,1996:209-213.
[10]Koji Moriya,Takahiro Sako.Oxygen Sensor
Monitoring a De-terioration of a Three-Way Catalyst in Natural Gas Fueled
En-gines.Sensors and Actuators,B73,March 2001:142-151.
[11]P Schmidt Zhang,K P Sandow,F Adolf et
al.A Novel ThickFilm Sensor for Simultaneous O2and NO Monitoring in
ExhaustGases.Sensors and Actuators,B70,November 2000:25-29.
[12]T Wang,R E Soltis,E M Logothetis,J A
Cook,D R Ham-burg.Static Characteristics of ZrO2Exhaust Gas Oxygen Sen-sors.SAE
Paper,No.930352,1993.
|