武利霞;郭志平;吴书伟;张学文;李小波;
1:内蒙古工业大学机械工程学院
摘要：新型二冲程微型摆式内燃机中心摆的振动会给其运行带来一定的危害。本文基于动力学理论和振动理论,采用虚拟样机技术,应用ADAMS软件建立中心摆模型并研究其振动特性。首先利用MATLAB软件计算出各工作阶段的压力随时间的变化,把计算出的参数赋予模型,利用Joints和Forces等工具约束三维模型,最后对其中心摆进行振动仿真分析,并绘制频率响应曲线,以验证其响应是否在所要求的范围之内。
关键词： 微型摆式内燃机(MFSPE);;中心摆;;振动
Abstract: Vibration of the novel two-stroke
micro free swing piston engine's center swing is harmful to running of
internal-combustion engine.Based on dynamic and vibration theory,according to
the virtual prototyping technology,using ADAMS software to built the model of
engine's center swing and analysis it's speciality of vibration.First,using
MATLAB software to work out the press change at every working phase,endow the
parameters to the model,using "Joints" and "Force" to
restrict 3D model.at last,simulated and analyzed the swing,Then protracted the
curve of frequency response,validate weather the respond is normal.
Keywords: Micro Free Swing Piston
Engine;Center Swing;Vibration
参考文献：
[1]郭志平,叶佩青,张仕民.微型摆式发动机的总体设计[J].小型内燃机与摩托车,2002,31(4):1—4。
[2]师汉民,《机械振动系统—分析.测试.建模.对策》,华中科技大学出版社,2004。
[3]张瑞峰.精通Matlab6.5版[M].北京:中国水利水电出版社,2004
[4]李军,邢俊文,覃文浩.Adams实例教程[M].北京:北京理工大学出版社,2002
|
