首  页 学会之窗 新闻中心 标准法规 电子报刊 技术交流 联系我们
电子报刊
《内燃机与动力装置》
2023
·2023年第一期
2022
·2022年第六期
·2022年第五期
·2022年第四期
·2022年第三期
·2022年第二期
·2022年第一期
更多>>
《信息荟萃》
通知通告 MORE..
·便函2022-3号 关于组织开展“第十..
·便函2022-2号 关于组织开展“2022..
·便函2022-1号 关于组织推荐“科学..
·202201号文 关于发送《山东内燃机..
·关于刘卫东同志离任名誉理事长的公..
·山东内燃机学会关于选举人名单的公..
标准法规 MORE..
·山东7月1日起严格执行重型柴油新车..
·政策 | 2021年1月1日起一大波商用..
·政策 | 2022年12月1日,农机切换国..
·政策 | 国务院下“命令”!新能源..
·数据 |2020年1-8月内燃机行业进出..
·今天!轻型车国六全国范围实施!两..
·国六排放标准实施延期至2021年,终..
 
当前位置:首页 > 电子报刊 > 《内燃机与动力装置》
  发表:admin(管理员) 日期:2014/10/15 点击率:1400
壁面模型对缸内传热多维瞬态数值模拟计算的影响

 周剑  

  • 广州本田汽车有限公司技术部
   摘要:采用常规湍流模型对柴油机缸内传热过程进行多维瞬态模拟计算时,壁面模型的处理方式将直接影响到整个模拟计算的精度和准确性,为此本文利用多维瞬态模拟计算方法考察壁面模型对缸内传热模拟计算的影响。研究结果表明:壁面模型中复合壁函数法由于在近壁处湍能被修正,使缸内多维模拟计算结果更接近于试验值。

    关键词: 柴油机;壁面模型;缸内;传热;多维模拟

    Abstract: When general turbulence model is used to perform a multi-dimensional transient numerical simulation on heat transfer process in diesel engine cylinder,the precision and accuracy of simulation computation is directly influenced by the way of how to deal with wall model.The paper is to investigate how different wall models affect the simulation computation in cylinder heat transfer through use of multi-dimensional transient numerical simulation.After comparison to simulation results from different wall models,it is found that hybrid wall treatment which combines low Reynolds number model and standard wall function makes in-cylinder multi-dimensional numerical simulation close to test results.

    Keywords: Diesel Engine;Wall Model;Inner Cylinder;Heat Transfer;Multi-Dimensional Numerical Simulation

 参考文献:

    {1]解茂昭.内燃机计算燃烧学.大连理工大学出版社,20059.

  [2]史春涛,张宝欢,金则兵,.湍流模型的发展及其在内燃机CFD中的应用.拖拉机与农用运输车,2006,33(1):5-10.

  [3]Hanjalic,K.,Popovac,M.and Hadziabdic,M.A robust near-wall elliptic-relaxation eddy-viscosity turbulence model forCFD.Int.J.Heat and Fluid Flow,2004,25:1047-1051.

  [4]Durbin,P.A.Near-wall turbulence closure modeling withoutdamping function.Theoret.Comput.Fluid Dynamics,3,1991,1-13.

  [5]Popovac,M.,Hanjalic,K.Compound Wall Treatment forRANS Computations of Complex Turbulent Flows.3rd M.I.T.Conference on Computational Fluid and Solid Mechanics,Boston,2005.

  [6]Popovac,M.,Hanjalic,K.Compound wall treatment forRANS computation of complex turbulent flows and heat transfer.Flow Turbulence Combust,2007,78:177-202.

  [7]Kader,B.A.Temperature and concentration profiles in fullyturbulent boundary layers.Int.J.Heat Mass Transfer,1981,24:1541-1544.

  [8]Han,A.and Reitzm R.D.A temperature wall functionformulation for variable-density turbulent flows with applicationto engine convective heat transfer modeling.Int.J.Heat MassTransfer,1997,Vol.40,No.3:613-625.

  [9]AVL-Fire Spray,2005,5.

  [10]Kong,S.C.,Han,Z.,Reitz,R.D.The Development andApplication of a Diesel Ignition and Combustion Model forMultidimensional Engine Simulation,SAE 950278,1995.

  [11]吕继组,白敏丽,周龙.初始条件及喷雾对柴油机缸内流动的影响研究.大工学报.2008,48(3):344-350.




上一篇:长安混合动力汽车的排放实验与仿真分析
下一篇:蜗壳截面变化规律对蜗壳内流动及其出口参数的影响
版权所有 © 2014 山东内燃机学会 联系电话:0531-80687025 地址:济南市长清大学科技园海棠路5001号 邮编:250357
沙子烘干机 真石漆搅拌机 颚式破碎机 筛沙机 雷蒙磨 撕碎机 干粉搅拌机 自动包装机 有机肥生产线 有机肥设备 有机肥生产线 砖雕 脉冲除尘器设备 袋式除尘器 螺旋上料机 定量包装机 粉煤灰输送机 转鼓搅齿造粒机 有机肥设备厂家 砖雕 干混砂浆生产线 固液分离机 固液分离机 养猪设备 干粉砂浆设备 真石漆搅拌机 干粉砂浆生产线 干粉砂浆设备 木屑粉碎机 沙子烘干机 玉米芯粉碎机 斗拱 干粉砂浆生产线 黄沙烘干机 标线涂料设备 防腐管道 混凝土搅拌站 石料破碎机 砖雕厂家 四合院施工 村口牌坊 沙子烘干机 腻子粉搅拌机 撕碎机 搅拌站控制系统 肥料包装机 仿木护栏 腻子粉搅拌机 干粉砂浆搅拌机 河沙烘干机 干粉搅拌机 干粉砂浆搅拌机 沙子烘干机 猪粪粪便脱水机 猪粪粪便处理机 猪粪固液分离机 电磁流量计 磁翻板液位计 青瓦厂家 装饰立瓦 青砖 古建面砖 琉璃瓦 城墙砖 仿古青瓦 别墅屋面瓦 斗拱 劈开砖 砖雕 古建施工队 挂瓦施工队 寺庙施工 古建亭子 影壁墙施工 四合院施工 门楼施工 古建游廊 反击式破碎机 差压变送器
法律咨询专家:董庆华
鲁ICP备13027242号-1