王凤英,卫先勇  

                                 济南市压力容器厂

    摘要：本文以一种正置立式U形管式高加为例探讨高压加热器主要的部件的制造及检验,并着重对水室各部件、管板及管束的制造与检验进行了详细的介绍。

    关键词： 水室的焊接与检验;管板的制造;U形管的弯制;质量检查

    Abstract: This article takes the right vertical U-shaped HP Heater as an example to discuss the manufacture and inspection of the main parts of the HP Heater andespecially make a detailed instruction for the manufacture and inspection of the water room parts,tube plate and tube bundle.

    Keywords: Welding and Inspection to the Water Room;Fabrication of the Tube Plate;Bending of the U-shaped Pipe;Quality Inspect

参考文献:

  [1]质技监局锅发[1999]154号.压力容器安全技术监察规程.

  [2]GB150-1998.钢制压力容器.

  [3]GB151-1999.管壳式换热器.

  [4]JB/T4709-2000.钢制压力容器焊接规程.

  [5]JB4726-2000.压力容器用碳素钢和低合金钢锻件.

  [6]JB/T4730-2005.压力容器无损检测.

  [7]JB/T8190-99.高压加热器.

  [8]美国给水加器制造商协会.Standards of Tubular ExchangerManufactures Association,1999.

  [9]Heat Exchange Institute,Inc.Standards for Steam SurfaceCondensers,1995.

  [10]美国机械工程学会,2004 ASME Boiler and Pressure VesselCode V.Nondestructive Examination.

  [11]中国机械工程学会焊接学会.焊接手册.(第2版)第2卷。北京:机械出版社,2001.

  [12]中国化工装备协会.钢制力容器制造常规检验方法与检具.云南人民出版社,2007