赵永娟;马超;刘云岗;
1:山东大学能源与动力工程学院
摘要:涡轮特性对涡轮增压器性能具有重要的影响,本文对涡轮特性的研究方法进行了简要的回顾。根据国内外学者对涡轮效率和涡轮流量特性的研究现状,总结了涡轮效率和流量特性的各种试验测量和数值计算方法,并简要分析了这些方法获得的涡轮性能参数的准确性,同时对这些方法各自的优缺点进行了对比。为涡轮增压器生产厂家获得涡轮特性提供参考。最后论文总结了涡轮性能研究方法的特点。
关键词: 径流式涡轮;;涡轮效率;;涡轮流量
Abstract: Turbine performance plays an
important effect on turbocharger performance.This paper reviewed several
research methods of turbine performance.Several tests and numerical methods
that can obtain the turbine efficiency and the turbine flow characteristics
were summarized according to the research status of.Also the accuracy and the
merits and demerits of these methods mentioned about and compared.The
introduction of these methods provides a reference for the turbocharger
manufacturers to obtain the turbine performance.Finally, this paper summarized
the features of these methods.
Keywords: Radial Vaned Turbine;Turbine Efficiency;Turbine
Flow
参考文献:
[1]Nicholas C.Baines.Fundamentals of
Turbocharging.ConceptsNREC.2005.
[2]施新,马朝臣.车用涡轮增压器涡轮测功方法的发展[J].车用发动机,2003(2):4~6.
[3]E.Pischinger,A.Wunsche.径流涡轮的特性及其对涡轮增压过程的影响.NASA
TND-8603-1997.
[4]D.G.Ainley,G.C.R.Mathieson.An
Examination of the flowand Losses in Blade Rows of Axial Flow Turbine.1951.
[5]J.Dunham,P.M.Came.Improvements to the
Ainley-Mathieson Method of Turbine Performance Prediction.Trans.ASME.J.of
Eng.Power.1970,7.
[6]Benson RS,Dcrimshaw K H.An Experimental
Investigation ofNon-Steady Flow in a Radial Gas Turbine[J].Proceedings
ofIMechE.1965-66,180(3J):74~85.
[7]Spence S W T,Artt D W.Experimental
Performance Evaluationof a99.0
mmRadial Inflow Nozzled Turbine with DifferentStator Throat
Area[J].Proceedings of IMechE.Journal ofPower and Energy.1997,211(A6):477~488.
[8]Wong R Y,Nushaum W J.Air Performance
Evaluation of a 4.0 Inch Mean Diameter Angle Stage Turbine at Various
InletPressures from 0.14 to 1.88 Atmospheres and CorrespondingReynolds from
2500 to 5000[M].NASA TN D-1315,1962.
[9]于立国,马朝臣,施新.一种车用涡轮增压器涡轮定熵效率测量的新方法.内燃机学报.2008(3).
[10]Hiromasa Yamaguchi,Toshihiko Nishiyama
and Kunio Horiai.High Performance Komatsu KTR 150
Turbocharger.SAETransactions,1984,93(1):145~153.
[11]宫下猛,富田铁也,石原大治.非定常流下こおけるラジアルタ.———ビンの性能.石川岛播磨技报,1973,13(3):259~269.
[12]Hiromasa Yamaguchi,Toshihiko Nishiyama
and Kunio Horiai.High Performance Komatsu KTR 150
Turbocharger.SAETransactions,1984,93(1):145~153.
[13]黄荣华,蒋克生,薛天纯.涡轮空气动力测功装置.武汉汽车工业大学学报,1997,6.
[14]Winterbone D E,Alexander G
I.Measurement of thePerformance of a Radial Inflow Turbine in Conditional
Steadyand Unsteady Flow[M].Proceedings of the 4th IMechEInternational
Conference on Turbocharging and Turbochargers.London:Mechanical Engineering
Publications,1990.
[15]Yeo J H,Baines N C.Pulsating Flow
Behaviour of a Twin-Entry Vaneless Radial-Inflow Turbine[M].Proceedings ofthe
4th IMecE International Conference on Turbocharging
andTurbochargers.London:Mechanical Engineering Publications,1990.
[16]Dale A,Acgi,Watson N.Vaneless Radial
TurbochargerTurbine Performance[M].Proceedings of the 3rd IMechEInternational
Conference on Turbocharging and Turbochargers.London:Mechanical Engineering
Publications,1986.
[17]马朝臣,郭林福,施新,等.径流式有叶涡轮流量特性预测及试验研究.北京理工大学学报,2002,12.
[18]常婉帜,戴韧,刑卫东,等.增压器涡轮性能试验与CFD计算方法的研究.车用发动机,2007,12.
[19]李杜.基于进出口温度的涡轮定熵效率测试方法研究.北京理工大学,硕士学位论文.
[20]Niklas Winkler,Hans-Erik ngstr m,Ulf
Olofsson.Instantaneous On-Engine Twin-Entry Turbine EfficiencyCalculations on a
Diesel Engine,SAE.2005.
[21]朱大鑫.涡轮增压与涡轮增压器[M].北京:机械工业出版社,1992.
[22]马朝臣,张殿佐.一种涡轮流量特性的预测方法.中国工程热物理学会第十一届学术会议.
[23]施新,马朝臣.车用增压器涡轮非稳态流动特性研究进展.车用发动机,2003,10. |