姜斌,殷志航   

江苏江淮动力股份有限公司技术中心;

    摘要：采用氧-乙炔火焰喷钼工艺对活塞表面进行喷钼处理,提高活塞的耐磨性和表面硬度。通过进行台架试验,测量了柴油机采用喷钼活塞时的油耗、功率、扭矩、排温等性能参数,分析喷钼活塞的实际效果。研究结果表明,与原机活塞相比,柴油机采用喷钼活塞后,标定工况点的燃油消耗率下降约2.6%;功率提高5kW,最大扭矩点扭矩提高10N.m;排温下降8℃左右。

    关键词： 柴油机;活塞;性能

    Abstract：The process to coat molybdenum coating with oxygen-ethyne flame on the piston surface is applied to improve its wear durability and the surface hardness.By bench tests,those parameters are measured including oil consumption,power,torque,exhaust temperature when the diesel engine is employed with piston with the molybdenum coating.Compared with the engine equipped with the piston without molybdenum coating,the results show that oil consumption decreases about 2.6%,power increases 5kW and maximum torque raises 10N.m but the exhaust temperature decreases about8℃when the engine uses this new type piston.

    Keyword：Diesel Engine;Piston;Performance

参考文献:

[1]陈建荣,杜伟,袁影.“油气政策”-“十一五”回顾及“十二五”展望[J],国际石油经济,2011.1-2:90-97.

[2]陈海涛.汽车结构因素对燃油经济性的影响[J].公路与汽运,2006年,第2期:1-4.

[3]叶晓明,蒋炎坤,张毅,等.结构参数对活塞环润滑性能影响分析[J].车用发动机,2007年,第4期:19-23.

[4]刘世英,赵旭东,田小青,等.发动机活塞机械强度试验影响因素的探讨[J].内燃机工程,2011年,第32卷,第2期:89-92.